System Design
DEPENDING ON YOUR HARLEY DAVIDSON AND WHAT YOU WANT OUT OF YOUR AUDIO SYSTEM HERE ARE SOME SYSTEM DESIGN IDEAS WITH PRODUCT LISTING, PRICING AND DEGREE OF DIFFICULTY IN THE INSTALLATION
NOTE: There are a million ways “to skin this cat”. So to speak. These 4 systems are logical for a 4 channel system using a 4 channel amplifier (with DSP 🙂 ) But many ways to configure your system to YOUR liking!
SYSTEM 1
- 4 X 150 WRMS DSP AMPLIFER (NO FADE)
- PAIR OF 6.5 INCH – 2 OHM COAX HORN SPEAKER – FAIRING
- PAIR OF 6 x 9 INCH – 2 OHM COAX HORN SPEAKERS – BAGS
- ***SPECIAL NOTE – You need an aftermarket 6 X 9 “Lid Kit to install this system
DEGREE OF DIFFICULTY
MODERATE DIFFICULTY
SYSTEM 2
- 4 X 150 WRMS DSP AMPLIFER (FADE ONLY IF BIKE “FLASHED”)
- PAIR OF 6.5 INCH – 2 OHM MIDBASS SPEAKER – FAIRING
- PAIR OF RR1T 1 INCH RING RADIATOR HORN TWEETER -FAIRING
- PAIR OF 6 x 9 INCH – 2 OHM MIDBASS SPEAKER SPEAKERS – BAGS
- ***SPECIAL NOTE – You need an aftermarket 6 X 9 “Lid Kit to install this system
- PAIR OF RR1T 1 INCH RING RADIATOR HORN TWEETER – BAGS
DEGREE OF DIFFICULTY
DIFFICULT!!!
SYSTEM 3
- 2 X 350 WRMS DSP AMPLIFER – “BRIDGED” STEREO/MONO
- PAIR OF 6.5 INCH – 4 OHM COAX HORN SPEAKER – FAIRING
- FAIRING 2 SPEAKER SYSTEM – ONLY
DEGREE OF DIFFICULTY
SEMI-DIFFICULT
SYSTEM 4
- ONE – 2 X 350 WRMS DSP AMPLIFER “BRIDGED” STEREO/MONO
- ONE – 2 X 350 WRMS AMPLIFER “BRIDGED” STEREO/MONO
- PAIR OF 6.5 INCH – 4 OHM MIDBASS SPEAKER – FAIRING
- PAIR OF RR1T 1 INCH RING RADIATOR HORN TWEETER – FAIRING
- PAIR OF 6 x 9 INCH – 4 OHM MIDBASS SPEAKER SPEAKERS – BAGS
- ***SPECIAL NOTE – You need an aftermarket 6 X 9 “Lid Kit to install this system
- PAIR OF RR1T 1 INCH RING RADIATOR HORN TWEETER – BAGS
DEGREE OF DIFFICULTY
VERY DIFFICULT!!!