CX150.4D 150w x 4 Amplifier
CX150.4D 150w x 4 Amplifier
4 CHANNEL POWER AMPLIFIER
- 4 X 70 WRMS into 4 ohms @ 12.5 Vdc
- 4 X 92 WRMS into 4 ohms @ 14.4 Vdc
- 4 X 115 WRMS into 2 ohms @ 12.5 Vdc
- 4 X 152 WRMS into 2 ohms @ 14.4 Vdc
BRIDGED MONO – 2 CHANNEL
- 2 X 218 WRMS into 4 ohms @ 12.5 Vdc
- 2 X 302 WRMS into 4 ohms @ 14.4 Vdc
- Frequency response – 20-20,000 +/- 3dB THD < 0.5%
- Operating Voltage: 8V – 16V
- Current Draw (Music): 40 A
- Current Draw (Max): 80 A
- Recommended Fuse (Music): 40 A
- Total Efficiency: 79%
- Damping Factor: 200
- SNR: 91dB
- Crossover LPF/FULL/HPF : 40 TO 400Hz
- Slope:12dB per octave
- Gain : 0.2V – 12 Vac
- Turn-On Configuration: REM/VOX/DC
- THD + N (10% Rated Power): 0.1%
- Product Dimensions (Inches / Millimeters): 7.0 x 4.0 x 1.375 in / 177.8 x 101.6 x 34.9 mm
Pro Sound for 2014 & Up Harley Street Glide, Road Glide, Electra Glide, & Ultra
CICADA AUDIO – The “New kids” on the block
The new Cicada Audio CP65.4 speakers are a perfect solution for 2014 and later Harley baggers. These speakers are an easy fit and do not
require an additional tweeter location on the fairing. They simply bolt into the factory speaker locations.
Designed AND Built Specifically for Harley
Cicada Audio was started to develop product SPECIFICALLY for Harley-Davidsons. Even though you’ve probably never heard of Cicada
Audio….our president and head engineer has been designing 12V audio for over 30 years. He has 5 design and engineering awards and 2
design patents. He’s developed 1,000’s of products in that time many gaining “cult” status. He REALLY knows 12 volt audio. He saw that
there was a real need for some new thinking and new direction in audio. Specifically “motorcycle audio”. Cicada Audio doesn’t do “car” audio,
we don’t do “marine” audio, we don’t do “powersport” audio.
We ONLY do Harley Davidson™ audio…PERIOD!@!!
Our first products are CoAx Horn drivers. These drivers handle more power, are louder, play lower, with more authority and sound better right
out of the box than any other pro audio type speaker for Harley applications. We’ve built these speakers with the best materials we can use
and keep sensitivity and sound quality as high as possible. With 2 inch voice coil’s on the midbass driver and 1.4 inch voice coil on the
aluminum diaphragm tweeter, we’ve built in extreme sensitivity for unreal output and high heat dissipation. Light weight neodymium magnets
and mounting dimensions specific to late model Harley fairings, these speakers are way beyond all the competition.
Along the same lines, the cone materials, surrounds and finishes have passed extensive UV exposure testing to ensure these speakers will
look and sound amazing for years to come. The coaxially – horn-loaded tweeter design offers amazing efficiency and clarity.
Fitment: Fits all ’14 & up batwing fairings (Street Glide, Electra Glide, Ultra). Fits ’15 & up Road Glide with slight modification to
fairing speaker pods (heat gun is used to make a little more room for the magnet). Fits ’13 and down batwing fairings if you grind off
the small plastic rib on the inside of the outer fairing. Does not fit ’13 and down Road Glide, tour pack location on Ultra models, or
lower fairings without custom fabrication.
Also as a added benefit we’ve designed an easily replaceable Horn Tweeter Diaphragm. We, at Cicada, always assume worst case
scenarios! Just in case!!! We are trying to be the solution based company for YOU!
Harley-Davidson® and Road Glide® are registered trademarks of Harley-Davidson Motor Company
CH65.4 – 6.5” High Performance Full-Range Co-Axial Horn Speaker
500WRMS/1000 MAX Power Handling- PAIR
Neodymium High Energy/ Light Weight N35 Magnet structure
Heavy Duty/ Die-cast Aluminum Basket
6.5” 4 Ohm – High Temp Voice Coil (Black Coat™)Voice Coil MidBass
Shortening Ring for the Ultimate in speaker control
1.4” Aluminum Diaphragm High-Temp Voice Coil for Tweeter
Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
Frequency Response: 75Hz -20Khz+/-5dB
High Sensitivity:4dB / 99dB 1W/1M Average (1W/1M – 2.83V)
12dB Crossover with custom tooled/ Vented crossover case
Can be Bi-Amped (Horn Tweeters can be run on their own dedicated channels)
Mounting Depth: 3.0” / 2mm
Mounting Diameter: 5.7” / 145.5mm
SOLD ONLY IN PAIRS
CH65.4 – 6.5” High Performance Full-Range Co-Axial Horn Speaker – PAIR
QTY ADD TO CART
MAIN MENU SOCIAL CONTACT US COMPANY QUICK LINKS
Copyright & Trademark Notices
Online & Internet Sales Policies
– or –
– or –
2021 Cicada Audio
WE DO NOT SELL OR SHIP INTERNATIONALLY – DONT EVEN ASK!!!
COAX HORN PRODUCT PAGE CH65.4 LINK WAS CLICKED
(Basically PG 5)
Home Products About Us Dealer Locator System Designs Support
MOTORCYCLE AUDIO KITS
TECH SHEET ipsum OWNERS MANUAL SYSTEM DESIGNS
TWEETER DIAPHRAGM REPLACEMENT – EZY PZY®!!!
Harley-Davidson® and Road Glide® are registered trademarks of
Harley-Davidson Motor Company
SYSTEM DESIGN PAGE – FROM SIMPLE TO AWESOME! CHECK IT OUT!!!