Best Selling Products
Best Selling Products
List best selling products
-
CH65.2 6.5″ Coax Horn – 2 ohm
$549.99
CH65.2 – 6.5 Inch 2 Ohm High-Performance Coaxial Horn Speaker – PAIR
Pro Sound for 2014 & Up Harley Street Glide®, Road Glide®, Electra Glide®, & Ultra®
- 250wRMS/500w MAX Power Handling
- Neodymium High Energy/ Light Weight N35 Magnet structure
- Heavy Duty / Die-cast Aluminum Basket
- 2.0” 2 Ohm – High Temp Voice Coil (Black Coat™) Voice Coil Mid-Bass
- Shortening Ring for the Ultimate in speaker control
- 1.4” Aluminum Diaphragm High-Temp Voice Coil for Tweeter
- Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
- Frequency Response: 75Hz -20Khz+/-5dB
- High Sensitivity:4dB / 99dB 1W/1M Average (1W/1M – 2.83V)
- 12dB Crossover with custom tooled/ Vented crossover case
- Can be Bi-Amped (Horn Tweeters can be run on their own dedicated channels)
- Mounting Depth: 3.0” / 76.2mm
- Mounting Diameter: 5.7” / 145.5mm
SOLD ONLY IN PAIRS
-
CH65.4 6.5″ Coax Horn – 4 ohm
$549.99
6.5 Inch 4 Ohm High Performance Coaxial Horn Speaker – PAIR
Pro Sound for 2014 & Up Harley Street Glide, Road Glide, Electra Glide, & Ultra
- 250wRMS/500w MAX Power Handling
- Neodymium High Energy/ Light Weight N35 Magnet structure
- Heavy Duty/ Die-cast Aluminum Basket
- 2.0” 4 Ohm – High Temp Voice Coil (Black Coat™) Voice Coil Mid-Bass
- Shortening Ring for the Ultimate in speaker control
- 1.4” Aluminum Diaphragm High-Temp Voice Coil for Tweeter
- Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
- Frequency Response: 75Hz -20Khz+/-5dB
- High Sensitivity:4dB / 99dB 1W/1M Average (1W/1M – 2.83V)
- 12dB Crossover with custom tooled/ Vented crossover case
- Can be Bi-Amped (Horn Tweeters can be run on their own dedicated channels)
- Mounting Depth: 3.0” / 76.2mm
- Mounting Diameter: 5.7” / 145.5mm
SOLD ONLY IN PAIRS
-
DSP150.4D 150w x 4 Amplifier – Discontinued replaced by DSP600.4D
$649.99
DSP CONTROLLED 4 CHANNEL POWER AMPLIFIER – DISCONTINUED GO TO DSP600.4D
- 4 X 70 WRMS into 4 ohms @ 12.5 Vdc
- 4 X 92 WRMS into 4 ohms @ 14.4 Vdc
- 4 X 115 WRMS into 2 ohms @ 12.5 Vdc
- 4 X 152 WRMS into 2 ohms @ 14.4 Vdc
BRIDGED MONO – 2 CHANNEL
- 2 X 218 WRMS into 4 ohms @ 12.5 Vdc
- 2 X 300 WRMS into 4 ohms @ 14.4 Vdc
- Frequency response – 20-20,000 +/- 3dB THD < 0.5%
- Operating Voltage: 8V – 16V
- Current Draw (Music): 40 A
- Current Draw (Max): 80 A
- Recommended Fuse (Music): 40 A
- Total Efficiency: 79%
- Damping Factor: 200
- SNR: 91dB
- DSP Crossover HPF/LPF: 0 TO 20kHz
- Slope configurable 6/12/18/24/48dB
- DSP PEQ – 8 BANDS
- Q’s Adjustable from 0.05 – 20
- THD + N (10% Rated Power): 0.1%
- Product Dimensions (Inches / Millimeters): 8.875 x 4.0 x 1.4 in / 225.4 x 103 x 36 mm
-
CX65.2 – 6.5” Coax – 2 ohm
$389.99
CX65.2 – 6.5” 2 Ohm High Performance Full-Range Co-Axial Speaker – Pair
Specification：
- 100WRMS/200 MAX Power Handling
- Neodymium High Energy/ Light Weight N35 Magnet structure
- Waterproof IMPP Cone with NBR surrounds
- Heavy Duty/ Injected High Temp Polymer Frame.
- 1.4” 2 Ohm – High Temp Voice Coil (Black Coat™) Voice Coil Mid-Bass
- Shortening Ring for the Ultimate in speaker control
- 1.0” PEI dome tweeter with Neodymium magnet
- DPSH ® “Dual-Phase Slot Horn”
- Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
- Frequency Response: 54Hz -20Khz+/-5dB
- High Sensitivity: 94dB 1W/1M Average (1W/1M – 2.83V)
- Built in 6dB Crossover
- Low Profile Design / Easy Fit
- Mounting Depth: 2.26” / 57.4mm
- Mounting Diameter: 5.32” / 135.1mm
- Outside Dimensions: 6.5” / 165mm
SOLD ONLY IN PAIRS
-
CX65.4 – 6.5” Coax – 4 ohm
$389.99
CX65.4 – 6.5” 4 Ohm High Performance Full-Range Co-Axial Speaker – Pair
Specification:
- 100WRMS/200 MAX Power Handling
- Neodymium High Energy/ Light Weight N35 Magnet structure
- Waterproof IMPP Cone with NBR surrounds
- Heavy Duty/ Injected High Temp Polymer Frame.
- 1.4” 4 Ohm – High Temp Voice Coil (Black Coat™) Voice Coil Mid-Bass
- Shortening Ring for the Ultimate in speaker control
- 1.0” PEI dome tweeter with Neodymium magnet
- DPSH ® “Dual-Phase Slot Horn”
- Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
- Frequency Response: 54Hz -20Khz+/-5dB
- High Sensitivity: 94dB 1W/1M Average (1W/1M – 2.83V)
- Built in 6dB Crossover
- Low Profile Design / Easy Fit
- Mounting Depth: 2.26” / 57.4mm
- Mounting Diameter: 5.32” / 135.1mm
- Outside Dimensions: 6.5” / 165mm
SOLD ONLY IN PAIRS
-
DSP88 DSP 8 CH IN / 8 CH OUT
$329.99
DSP88 – 8 CHANNEL DSP PROCESSOR – 8 IN/8 OUT
- Signal Input: 8 High-Low Level Inputs
- Signal Output: 8 RCA Outputs
- Output Impedance: 200 Ohms
- Frequency Response: 20Hz – 20kHz +/- 0.5Db
- Input Voltage: 0.02V – 12V
- Input Impedance: 20k Ohms
- Output Voltage: Up to 8V (Unity gain 4V gets UP to 4 V out, 2 V in gets UP to 2 V out, etc.)
- THD+N: <1.0%
- Signal-to-Noise: >100 dBA (A-weighted)
- Digital Signal Processing (DSP):
Speed: 147 MIPS Precision: 32-Bit Accumulators: 72-bit - Digital to Analog (DAC): Precision: 24-Bit
- Dynamic Range: 108 dB
- THD+N: -98 dB
- Analog to Digital (ADC): Precision: 24-Bit
- Dynamic Range: 105 dB
- THD+N: -98 dB
- Operating Voltage: 9 – 16 VDC
- Crossover Frequency: Variable: 20 Hz to 10 kHz
- Crossover Slope: Selectable Slope: 6/12/18/24/36/48 dB/Octave
- EQ Frequency Controls: Selectable Q: 0.05 to 20.0
- Dimensions (H x W x D): 1.26″ x 4.04″ x 5.12″ (32 mm x 102.5 mm x 130 mm)
Cicada Audio’s patented Bluetooth digital signal processor gives you the ability to do DSP tuning and signal summing via app. Using the downloadable CA DSP app on your smartphone or tablet.
You can upload saved system settings from one DSP88 and load it into a different DSP88. (Think of the possibilities!)
-
CMB10.S4 10″ Pro Mid-Bass – 4 ohm
$599.99
Pro Sound Mid-Bass Driver
- 600WRMS /1200 MAX Power Handling
- Ferrite Magnet structure
- Heavy Duty / Die-cast Aluminum Basket
- 3.0” 4-Ohm / 6 Layer High Temp Voice Coil (Black Coat™) Voice Coil
- Vented Voice Coil Gap for Maximum Heat dissipation
- Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
- Frequency Response: 35Hz -1.75Khz+/-5dB
- High Sensitivity: 87.2dB (1W/1M)
- Total Diameter: 10.24” / 260mm
- Mounting Depth: 4.31” / 109.5mm
- Mounting Diameter: 8.98” / 228mm
SOLD INDIVIDUALLY
-
CM65.4 6.5″ Mid-Bass – 4 ohm
$449.99
Pro Sound for 2014 & Up Harley Street Glide, Road Glide, Electra Glide, & Ultra
- 500WRMS/1000 MAX Power Handling- PAIR
- Neodymium High Energy/ Light Weight N35 Magnet structure
- Heavy Duty/ Die-cast Aluminum Basket
- 2.0” 4 Ohm – High Temp Voice Coil (Black Coat™) Voice Coil
- Shortening Ring for the Ultimate in speaker control
- Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
- Frequency Response: 75Hz -20Khz+/-5dB
- High Sensitivity:4dB / 93.2dB (1W/1M)
- Total Diameter: 6.5” / 165mm
- Mounting Depth: 3.0” / 76.2mm
- Mounting Diameter: 5.7” / 145.5mm
SOLD ONLY IN PAIRS
-
CH69.2 6X9″ Coax Horn – 2 ohm
$579.99
6 X 9 Inch 2 Ohm High Performance Coaxial Horn Speaker – PAIR
Pro Sound for 2014 & Up Harley Street Glide, Road Glide, Electra Glide, & Ultra
- 250wRMS/500w MAX Power Handling
- Neodymium High Energy/ Light Weight N35 Magnet structure
- Heavy Duty/ Die-cast Aluminum Basket
- 2.0” 2 Ohm – High Temp Voice Coil (Black Coat™) Voice Coil Mid-Bass
- Shortening Ring for the Ultimate in speaker control
- 1.4” Aluminum Diaphragm High-Temp Voice Coil for Tweeter
- Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
- Frequency Response: 75Hz -20Khz+/-5dB
- High Sensitivity:4dB / 99dB 1W/1M Average (1W/1M – 2.83V)
- 12dB Crossover with custom tooled/ Vented crossover case
- Can be Bi-Amped (Horn Tweeters can be run on their own dedicated channels)
- Total Diameter: 9.3” X 6.6” / 237mm X 167mm
- Mounting Diameter: 8.9” X 6.1” / 226.5mm X 155mm
- Mounting Depth: 3.7” / 93.2mm
SOLD ONLY IN PAIRS
-
HDPro4K Cicada Amp HD Plug-N-Play Harness Kit
$224.99
HDPro4K Cicada Amplifier Plug-N-Play Harness Kit includes
8-Gauge Power/Ground Kit
Includes:
-
Harnesses & Cables
HDTSLINK FACTORY RADIO “T” HARNESS FOR PLUG-N-PLAY AFTERMARKET AMPLIFIER INTEGRATION
$159.99
HDTSLINK FACTORY RADIO “T” HARNESS FOR PLUG-N-PLAY AFTERMARKET AMPLIFIER INTEGRATION
$159.99
HDTSLINK FACTORY RADIO “T” HARNESS FOR PLUG-N-PLAY AFTERMARKET AMPLIFIER INTEGRATION
-