Harnesses & Cables
Harnesses & Cables
-
-
-
HDFiM56Y-8 H-D® OUTPUT / INPUT MOLEX® PRE-OUT 5/6 OUT – 8′ HARNESS
Use this harness to connect (2) Cicada Audio® Amplifiers, IN THE FAIRING, bridged using the CH5/6 signal OUTPUT to the second Cicada Audio® Amplifiers INPUT, paralleled – 1.5′ length
-
HDCVOBP 2014+ H-D® CVO Rear Bag Amp By-pass Plugs – Set
Bypass the Factory Amplifier: Keep Your Factory Saddlebag Connections Intact and Fully Functional
-
HDPG4KD 4 AWG Dual Amp Power Kit for H-D®
4 AWG H-D® Dual Amplifier Power Kit
6ft Power/Ground with black over braid, terminated w/ ring terminals at the battery side, Ferrules on the amp side
(2) 3′ 8 AWG ferrule terminated power wires, (2) 3′ 8 AWG ferrule terminated ground wires
Remote trigger wire w/ H-D® plug for termination to remote trigger or plug into the H-D® harness
(2) 1-4 AWG to 2-8 AWG Distribution Blocks
Waterproof Mini ANL Fuse Holder w/60- and 100-amp fuses
-
HDPG4K 4 AWG Amp Power Kit for H-D®
4 AWG H-D® Amplifier Power Kit
6ft Power/Ground with black over braid, terminated w/ ring terminals at the battery side, Ferrules on the amp side
Remote trigger wire w/ H-D® plug for termination to remote trigger or plug into the H-D® harness
Waterproof Mini ANL Fuse Holder w/60- and 100-amp fuses
-
HD56oMPS-1.5 H-D® OUTPUT BAGGER MOLEX® PASS THROUGH LEFT AND RIGHT – 1.5′ HARNESS
Use this harness to connect a Cicada Audio® Amplifier IN THE FAIRING to another Cicada Audio® IN THE FAIRING. 1.5′ Length – Stereo only.
-
HD56oMPS-8 H-D® OUTPUT BAGGER MOLEX® PASS THROUGH LEFT AND RIGHT – 8′ HARNESS
Use this cable to connect a Cicada Audio® Amplifier IN THE FAIRING to a Cicada Audio® Amplifier IN THE BAG/TOUR PACK.
-
HDFRBoM-1.5 H-D® OUTPUT BAGGER MOLEX® LEFT AND RIGHT SPEAKER BRIDGED OUT – 1.5′ HARNESS
Use this harness to connect Cicada Audio® Amplifiers IN THE FAIRING for bridged output – 1′ Stereo / Bridged
-
HDFiM56Y-1.5 H-D® OUTPUT / INPUT MOLEX® PRE-OUT 5/6 OUT – 1.5′ HARNESS
Use this harness to connect (2) Cicada Audio® Amplifiers, IN THE FAIRING, bridged using the CH5/6 signal OUTPUT to the second Cicada Audio® Amplifiers INPUT, paralleled – 1.5′ length
-
HDFRBoM-8 H-D® OUTPUT BAGGER MOLEX® LEFT AND RIGHT SPEAKER BRIDGED OUT – 8.0′ HARNESS
Use this harness to connect (2) Cicada Audio® Amplifiers, (1) IN THE FAIRING to (1) in the bag / tour pack using CH5/6 signal output to bag / tour pak, paralleled input – 8′ length
-
HDPro4K Cicada Amp HD Plug-N-Play Harness Kit
HDPro4K Cicada Amplifier Plug-N-Play Harness Kit includes
8-Gauge Power/Ground Kit
Includes:
-
-
HDRiMY HD PLUG TO MOLEX – REAR “Y” BRIDGING ADAPTOR HARNESS
HDRiMY HD PLUG TO MOLEX – REAR “Y” BRIDGING ADAPTOR HARNESS
-
HDFiMY HD PLUG TO MOLEX – FRONT “Y” BRIDGING ADAPTOR HARNESS – PAIR
HDFiMY HD PLUG TO MOLEX – FRONT “Y” BRIDGING ADAPTOR HARNESS – PAIR
-
RCA2iM CICADA AMPLIFIER RCA INPUT HARNESS
CICADA AMPLIFIER RCA INPUT MOLEX HARNESS
RCA input Molex for Cicada Audio DSP-150.4D /CX150.4D & CX250.2D Amplifiers ONLY
-
SP2oM SPEAKER OUTPUT MOLEX HARNESS – CICADA Amplifiers ONLY
SPEAKER OUTPUT MOLEX
Speaker output Molex for DSP150.4D / DSP125.4D / CX150.4D / CX250.2D Amplifiers ONLY
-
HDRoM REAR SPEAKER OUTPUT MOLEX FOR CICADA AMPLIFIERS w/ 6 FT EXTENSION
HDRoM REAR SPEAKER OUTPUT MOLEX FOR CICADA AMPLIFIERS w/ 6 FT EXTENSION
-
HDRiM REAR HD CONNECTOR TO MOLEX INPUT HARNESS
HDRiM REAR HD CONNECTOR TO MOLEX INPUT HARNESS
-