Top Rated Products
Top Rated Products
List top rated products
-
CM8.4 8-inch Mid-Bass – 4Ω
$499.99
Pro Sound for 2014 & Up Harley Street Glide, Road Glide, Electra Glide, & Ultra
- 250WRMS/500 MAX Power Handling
- Neodymium high energy/ light weight N35 magnet structure
- Heavy duty / die-cast Aluminum basket
- 2.0-inch 4Ω / high temp (Black Coat™) voice coil
- Shortening ring for the ultimate in speaker control
- Advanced voice coil heat sink design for better heat dissipation
- Frequency Response: 75Hz -10Khz+/-5dB
- High Sensitivity: 94dB / 99dB 1W/1M Average (1W/1M – 2.83V)
- Total Diameter: 8.3-inch / 210.5mm
- Mounting Diameter: 7.1-inch / 180mm
- Mounting Depth: 3.6-inch / 91.2mm
-
CHDLID 2014 + Factory Bag Cut-in Grill Lid Kit – Pair
$329.99
Allows for the use of CH69 (Cast Frames) and CX69 (Plastic Frames) mounted into the factory Harley Davidson® bag lids.
Black finish allows for matching to any color bike. No need for additional color match painting.
-
BDA2000.4D 500w x 4 Amplifier
$899.99
4 CHANNEL POWER AMPLIFIER
Requires Lithium Battery Upgrade / 4 AWG Power Wire – HGPG4K
- 4 X 275 WRMS into 4 ohms @ 12.5 Vdc
- 4 X 331 WRMS into 4 ohms @ 14.4 Vdc
- 4 X 450 WRMS into 2 ohms @ 12.5 Vdc
- 4 X 542 WRMS into 2 ohms @ 14.4 Vdc
BRIDGED MONO – 2 CHANNEL
- 2 X 866 WRMS into 4 ohms @ 12.5 Vdc
- 2 X 1044 WRMS into 4 ohms @ 14.4 Vdc
- Frequency response – 20-20,000 +/- 3dB THD < 0.5%
- Operating Voltage: 8V – 16V
- Current Draw (Music): 60 A
- Current Draw (Max): 240 A
- Recommended Fuse (Music): 120 A
- Total Efficiency: 79%
- Damping Factor: 200
- SNR: 91dB
- Crossover LPF/FULL/HPF: 30 TO 300Hz
- Slope:12dB per octave
- Gain: 0.2V – 12 Vac
- Turn-On Configuration: REM/DC
- THD + N (10% Rated Power): 0.1%
- Product Dimensions (Inches / Millimeters): 9.14 x 5.37 x 2.1 in / 232 x 136.4 x 54 mm
-
HARLEY AUDIO KITS, System Design
DSPCH-4X4 4ch 600w DSP w/Bluetooth Amp & 4 Coax Horn Speaker
$2,399.99
DSPCH-4X4 4ch 600w DSP w/Bluetooth Amp & 4 Coax Horn Speaker
$2,399.99
Kit Includes:
(1) DSP600.4D DSP CONTROLLED 4 CHANNEL POWER AMPLIFIER
(1 PR) CH65.2 – 6.5“ COAX HORN SPEAKERS 2OHM
(1 PR) CH69.2 – 6X9″ COAX HORN SPEAKERS 2OHM
(1PR) CHDRGG – 2014 + H-D® Road Glide® Kidney Grill Set
(1PR) CHDSGG – 2014 + H-D® Street Glide® Grill Set
(1 PR) CHDLID 2014+ H-D(r) 6X9″ CICADA LID CUT IN KIT
-
CX65.2 – 6.5” Coax – 2 ohm
$389.99
CX65.2 – 6.5” 2 Ohm High Performance Full-Range Co-Axial Speaker – Pair
Specification：
- 100WRMS/200 MAX Power Handling
- Neodymium High Energy/ Light Weight N35 Magnet structure
- Waterproof IMPP Cone with NBR surrounds
- Heavy Duty/ Injected High Temp Polymer Frame.
- 1.4” 2 Ohm – High Temp Voice Coil (Black Coat™) Voice Coil Mid-Bass
- Shortening Ring for the Ultimate in speaker control
- 1.0” PEI dome tweeter with Neodymium magnet
- DPSH ® “Dual-Phase Slot Horn”
- Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
- Frequency Response: 54Hz -20Khz+/-5dB
- High Sensitivity: 94dB 1W/1M Average (1W/1M – 2.83V)
- Built in 6dB Crossover
- Low Profile Design / Easy Fit
- Mounting Depth: 2.26” / 57.4mm
- Mounting Diameter: 5.32” / 135.1mm
- Outside Dimensions: 6.5” / 165mm
SOLD ONLY IN PAIRS
-
Harnesses & Cables
HDFRBoM-8 H-D® OUTPUT BAGGER MOLEX® LEFT AND RIGHT SPEAKER BRIDGED OUT – 8.0′ HARNESS
$56.99
HDFRBoM-8 H-D® OUTPUT BAGGER MOLEX® LEFT AND RIGHT SPEAKER BRIDGED OUT – 8.0′ HARNESS
$56.99
Use this harness to connect (2) Cicada Audio® Amplifiers, (1) IN THE FAIRING to (1) in the bag / tour pack using CH5/6 signal output to bag / tour pak, paralleled input – 8′ length
-
CBG8LR 8.0″ Lip Style Grill – RINGS RAW, BLACK ALUMINUM– PAIR
$119.99
CNC cut aluminum 8.0″ Lip Style Grills, Rings are raw aluminum ready for custom paint, no prep required. The grill centers are black power coat painted, solid grills and center cut horn style grills all included.
-
CXX65.2 – High Performance Full-Range 6.5-inch Pro Coaxial – 2Ω
$429.99
- Designed for 2014 + H-D® factory designed locations
- V8™ Dispersion Guide
- Exclusive Cicada Design for 360o sound from tweeter
- Rain or Shine™ all weather performance design
- Built-In 6dB crossover
- PEI tweeter dome for best sound dispersion
- Moisture resistant
- Brighter sound
- More efficiency
- Kevlar cone
- Extremely lightweight and strong
- Moisture resistant
- Maximized efficiency
- Copper wire voice coils offer great sound while generating less heat
- N45H Neo Magnets
- High temperature resistant Polycarbonate custom tooled basket
- UV protection over all surfaces
- 5-inch Grills and Hardware are included
- Two (2) year warranty
Specification:
- 2Ω / 6.5-inch high performance coaxial driver
- Power handling: 100W RMS/200W MAX
- Voice Coils: 1.4-inch/35mm mid-bass and 1-inch/25mm Tweeter
- Cone: Kevlar
- Tweeter Dome: PEI
- Magnet: Neodymium
- Sensitivity: 93dB
- Frequency response 55 Hz – 20 kHz +/- 3dB
- Mounting Depth: 2.26-inch/57mm
- Mounting Diameter: 5.43-inch/138mm
-
HDRiM REAR HD CONNECTOR TO MOLEX INPUT HARNESS
$32.99
HDRiM REAR HD CONNECTOR TO MOLEX INPUT HARNESS
-
CHX69.2 6×9″ Pro Coax Horn 2Ω
$799.99
FEATURES:
- Nanofram™ Horn Cover
- Exclusive Cicada All-Weather Design for protection from rain
- Rain or Shine™ all weather performance design
- Available in 4 or 2Ω versions
- Aluminum tweeter diaphragm material
- Brighter sound
- More efficient
- 1.75″ OFC copper wire tweeter voice coils offer great sound while generating less heat
- External 12dB crossover with optional -3/-6 tweeter resistor attenuator
- Carbon Matrix Composite™ (CMC™) cone
- Lightweight / rigid / high temp
- Maximized efficiency / super strong
- Black Coat™ 2.5-inch high conductivity, low resistance OFC copper wire mid-bass voice coil ensures extreme temperature thermal performance
- N35SH Neodymium magnet
- Die cast Aluminum custom tooled basket with Vortex Flow Venting™
- Warranty: 2 years
SPECIFICATIONS:
- 2Ω – 6X9-inch PRO coaxial horn driver
- Power handling: 400W RMS/800W MAX
- Voice Coil: 2.5-inch/64mm Mid-bass & 1.75-inch/44mm Tweeter
- High temperature design
- Tweeter Dome: Aluminum
- Crossover: 12dB external custom tooled, vented, encased crossover
- Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover
- Cone: Carbon Matrix Composite™
- Magnet: Neodymium
- Sensitivity: 92dB, 1W / 1M
- Frequency Response: 46Hz – 20kHz +/- 3dB
- Mounting Depth: 3.75-inch/96mm
- Mounting Diameter: 5.7-inch/145mm X 8.5-inch/216mm
-
BDA600.4D 150w x 4 CH Amplifier
$389.99
4 CHANNEL POWER AMPLIFIER
- 4 X 100 WRMS into 4 ohms @ 12.5 Vdc
- 4 X 118 WRMS into 4 ohms @ 14.4 Vdc
- 4 X 130 WRMS into 2 ohms @ 12.5 Vdc
- 4 X 150 WRMS into 2 ohms @ 14.4 Vdc
BRIDGED MONO – 2 CHANNEL
- 2 X 261 WRMS into 4 ohms @ 12.5 Vdc
- 2 X 302 WRMS into 4 ohms @ 14.4 Vdc
- Frequency response – 20-20,000 +/- 3dB THD < 0.5%
- Operating Voltage: 8V – 16V
- Current Draw (Music): 60 A
- Current Draw (Max): 116 A
- Recommended Fuse (Music): 120 A
- Total Efficiency: 79%
- Damping Factor: 200
- SNR: 91dB
- Crossover LPF/FULL/HPF: 30 TO 300Hz
- Slope:12dB per octave
- Gain: 0.2V – 12 Vac
- Turn-On Configuration: REM/DC
- THD + N (10% Rated Power): 0.1%
- Product Dimensions (Inches / Millimeters): 5.08 x 5.37 x 2.1 in / 129 x 136.4 x 54 mm
-
CM8.4X CMC MIDBASS 8″ SPEAKERS 4Ω
0
FEATURES:
- Rain or Shine™ all weather performance design
- Available in 4- or 2-Ω versions
- Carbon Matrix Composite™ (CMC™) cone
- Lightweight / rigid / high temp
- Maximized efficiency / super strong
- Black coat™ 2-inch high conductivity, low resistance OFC copper wire mid-bass voice coil ensures extreme temperature thermal performance
- OFC copper shorting ring for extended high frequency performance
- N35SH Neodymium magnet
- Die cast Aluminum custom tooled basket with Vortex Flow Venting™
- Warranty: 2 years
SPECIFICATIONS:
- 4Ω – 8.0-inch mid-bass driver
- Power handling: 250W RMS/500W MAX
- Voice Coils: 2.0-inch/51mm mid-bass
- Cone: Carbon Matrix Composite™
- Magnet: Neodymium
- Sensitivity: 94dB, 1W / 1M
- response 70Hz – 20kHz +/- 3dB
- Mounting Depth: 3.7-inch/93mm
- Mounting Diameter: 7.1-inch/180mm